ALGO 8180 SIP not working

[Asad Hanif]

Hello Gurus,

I have an ALGO 8180 SIP alerting device which show registered in CUCM but is not working. Can someone share any document/experinece where you got it working.

Please see the attachemnt where it shows as registrerd with the call manager.

Thank,

Asad Hanif

[Amills]

How many Algo horns are out there? One for each garage? 

[chadrife1]

Just one Horn to accomadate the horn as both phones are in the same garage.     I contacted support via phone , left VM however they responded quickly to email.   I'm leaning towards it's a limitation with the CUCM rather than the 8186 as multiple SIP devices can be registered. 

[Amills]

What version of the firmware are you using? I can upgrade to the same version and see if it supports more than 1 extension for loud ringing. It isnt a limitation of the UCS, you assign extensions in UCS as you would any VoIP phone but the Algo unit can only be configured with 1 extension at a time per function, so 1 extension for paging, 1 extension for loud ringing. 

[chadrife1]

Hi Amills - I've upgraded it to 4.1.3   

Currently just one extension for ring  no page.  Wanting to add two additional ring extensions.

Thanks