call-manager-fallback

[andrei.goncalves]

Hi,

When the phones are registered with CM4.2 they can call to a pbx extension through e1-qsig... But when I break the link and the SRST feature is online I cannot access that pbx extension...

Any help ?

Thanks.

Andrei.

[pemelend]

hi Andrei

I suppose you are using MGCP with the E1, you need to add mgcp fallback so it goes into h323 instead of mgcp.

R(config)#application

R(config-app)#global

R(config-app-global)#service alternate Default

All info on this link:

http://www.cisco.com/en/US/tech/tk1077/technologies_configuration_example09186a008012ecc6.shtml

I hope this was your case.

Txs

Pedro