cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
155
Views
0
Helpful
1
Replies

Called Party Transformations

nestor.gallego1
Level 1
Level 1

Hi guys; I could help with the following:

For calls to the PSTN, dial the prefix 9xxxxxxx. the operator should receive only 7 digits.

I need to delete the prefix 9 when the call leaves the CUCM toward the operator. I see exisite the option to do so in the "Called Party Transformations" but does not appear enabled, you need to do to enable this option ??

Imagen

1 Accepted Solution

Accepted Solutions

Vivek Batra
VIP Alumni
VIP Alumni

Hi,

You need to configure pattern with dot like 9.xxxxxxx and now if you set discard digit to PreDot, all/any digits before dot will get stripped off. 

- Vivek

View solution in original post

1 Reply 1

Vivek Batra
VIP Alumni
VIP Alumni

Hi,

You need to configure pattern with dot like 9.xxxxxxx and now if you set discard digit to PreDot, all/any digits before dot will get stripped off. 

- Vivek