Cat 3560 PoE switch

[naive.naive]

Just migrated my network to Catalyst 3560 to cater for the future IP Tel infrastructure, the PC's connection were fine connecting to the new switch.

But there are a number of print server that are "dead" after connecting to the switch. (those print server can't be used anymore)

Anyone has these experience before?

[thisisshanky]

1. When you connect the print server to the port, do you get a link light ?

2. Is the print server in the same vlan as the PC ?

3. Can you paste a PC port and Print server port config ?

[naive.naive]

1. yes, but it just for a while..

2. its the same vlan (data vlan)

3. the config is just

switch acc vlan 21

spanning-tree portfast

[eperezrdz]

have you tried setting up the speed of the NICE on the server to auto?? o maybe 10 half , and set the port on the switch to 10 half , we had the same issue and that solved the issue.