Cisco 8851 with Webex Calling

[rab.j.choudhry]

I'm trying to follow Configure Monitoring of an Individual Line in the 8800 User Guide

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/MPP/8800/english/userguide/p881_b_8800-3pcc-user-guide/p881_b_8800-3pcc-user-guide-110_chapter_00.html#reference_7C1EEBB096A423291EB43839261D8D3B

However, I only see 2 Options

1 None

2 Speed Dial

I do not see the rest as outlined in Step 2 below.

Step 1

Press and hold down the line key for two seconds.

Step 2

On the Select feature screen, select one of these options: If you just want to use the key to monitor a line, select BLF presence. If you want to use the key to monitor a line and also speed-dial the monitored line, select BLF + Speed dial. If you want to use the key to monitor a line and also answer incoming calls to the monitored line, select BLF + Call pickup. If you want to use the key for all the three functions, select BLF + Speed dial + Call pickup.

[Jaime Valencia]

Are you sure you're running 3PCC FW?

[rab.j.choudhry]

Yes, we are using Webex Calling