I currently have 2 x Cisco 3560 non POE switches and now need to run VOIP on the switches, due to the lack of AC power near the phone POE injectors aren't really an option, so i need to add another switch.
I want to add a LINKSYS POE switch for the phones and then link the Linksys switch to the 3560 already installed so they are also part of the network, but i'm not to sure if it will work or if it will effect the VOIP in any manner.
It is possible to restrict the user access to the Web UI and Phone UI by changing the User Access (ua) attributes.
Connection_Type ua=“rw”, you can read and change the information on the user phone web and phone screen.
Connection_Type ua=“ro”, you can ...
Login to http://IP_ADDRESS_PHONE/admin/advanced
Navigate to Voice --> System --> Debug Level (The exact location of the Debug Level option might vary within this page, depending on the phone model)
Click on Submit All Changes
Login to http:// IP_ADDRESS_PHONE/admin/advanced/
Navigate to Info --> Debug Info -->Start Packet Capture
Download the PCAP file
FYI – the pcap is done at a wire level, not at an application level, therefore traffic encrypted by th...