Hello!
The MELT telephone works via Cisco ATA.
Automatic dialing through the telephone MELT works with the use of fixed communication, and when working through Cisco ATA - the telephone MELT after the first long dial tone rings the phone and does not call back.
As everything happens: the handset lies on the phone, I dial the number, I press the "auto dial" button and the phone dials the number, the first dial tone is heard and the phone stops ringing.
When making a call through a fixed line connection - MELT can skip over 9 beeps and signal that the line is not busy.
How to be? What to do?
SCC Cmd[0:0]SEIZURE
[0]StartTone 0
[0]DTMF 0 , insum:928914
[0]StopTone
[0]DTMF 4 , insum:931925
[0]DTMF 4 , insum:880648
[0]DTMF 3 , insum:917046
[0]DTMF 5 , insum:941861
[0]DTMF 4 , insum:898574
[0]DTMF 2 , insum:884361
[0]DTMF 6 , insum:939394
[0]DTMF 7 , insum:928879
[0]DTMF 3 , insum:930115
104:30;2,0,2,0,
Calling 0443542673
SCC Cmd[0:0]CLIP
SCC Cmd[0:0]CALL
proxy = sip.intertelecom.ua:5060
[0]INVITE Retry 0
Response=401; Unauthorized
[0]INVITE Retry 0
Response=100; Trying
[0]StopTone
SCC Cmd[0:0]CANCEL
[0:0]Cancel INVITE
[0]CANCEL Retry 0
Got BYE/CANCEL Resp
SCC:ev=13[0:0] 9 0
SCC Cmd[0:0]RELEASE
[0]MPT mode 0
>>> SIP Soft Reset [0:0] <<<
[0:0]Rel LBRC Res
