Cisco CP-8961 (SIP Firmware) ntp not work

[psyafter]

I have IP phone CP-8961 and firmware cmterm-8961.9-4-2SR4-1_REL.

I configured ntp server in SEP...cnf.xml

 <ntps>
<ntp>
<name>pool.ntp.org</name>
<ntpMode>Unicast</ntpMode>
</ntp>
</ntps>
 but seems it never try to resolve time. (I found same problem in other phone model on forum).

It's a bug or there is a way to get it working?

[Leo Laohoo]

---

@aluro wrote:
Is there any way you can provide me with the firmware files?

---

Use a web browser and a search engine to find out who else is hosting the files.

[aluro]

I already did that, but was unable to find the correct firmware files.
That's why I wrote in this forum.

[Leo Laohoo]

---

@aluro wrote:
I already did that, but was unable to find the correct firmware files.

---

How, exactly, did you try?  What terms was used to search the internet?

---

@aluro wrote:
That's why I wrote in this forum.

---

No one is going to share files here. 

[aluro]

Alright, I understand, that's fine. 

Well I actually managed to get a version of the firmware, that uses the NTP parameter. I pulled it of an older CUCM installation (CUCM8)  I had, since it's firmware version was older and therefore not affected by this change in firmware. 

So thanks anyway and by the way, an older version of the firmware for this phone is impossible to find, I used many different search terms but I just did not find it. 

[ryosakhu]

aluro: After login I can download this link:
https://software.cisco.com/download/home/281346594/type/282074289/release/9.0(3)