Hi,
I have some problem about Cisco SAF CCD External Client configuration.
I configured on CUCM:
- hq-saf-profile (username: SAFUSER, password: SAFPASSWORD)
- hq-saf-frwdr (security: hq-saf-profile, client id: HQSAF, ipaddress: 172.18.5.89, set my cucm to selected managers)
- hq-ccd-sip-trunk
- hq-dn-group
- hq-dn-pattern
- hq-ccd-advertising (select hq-ccd-sip-trunk, hq-dn-group, activate feature)
Here is my configuration on router:
router eigrp SAF
!
service-family ipv4 autonomous-system 1
!
topology base
external-client HQSAF
exit-sf-topology
exit-service-family
!
service-family external-client listen ipv4 5050
external-client HQSAF
username SAFUSER
password SAFPASSWORD
!
interface GigabitEthernet0/1
ip address 172.18.5.89 255.255.255.0
duplex auto
speed auto
!
ip rsvp bandwidth 40
!
But my cucm isn't registering on my saf-forwarder:
Detail data for client -- HQSAF
Username: SAFUSER Version: 1.2
Client Context: AS (1): AFI: IPv4Topology: Base
Router Name: SAF
Client not registered
Why?
CUCM v 8.5(1)
Router: C2911, IOS 15.0.1M7
Thank you for help.