cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
414
Views
0
Helpful
0
Replies

Cisco Unity Express Bootloader Failure

ahmed.gadi
Level 1
Level 1

I have been trying to install NME-CUE with SM-NM-ADPTR on C2911 Router. I can get to the console of the CUE and get the following on the console:

=============================

EIST: Built Mar 3 2006, 14:49:27
UsbHid Pwd Msg0 Msg1 Cache1 Mem2 Prot Cache2 Flg Siz0 Msg2 Ata Dsk Npx1 Apm Err Dbg Enb App MemReduce MemSync1 Ext MemSync2 PciRom Nmi Npx0 Dly P92 Sha0 Kbd0 Cmos Pci Dma0 PrtB Tim Exp Rfsh Geom

Initializing memory. Please wait. Mem0 Mem1 Ebda Sha1 CacheE Admgr1 Memmgr1 AdmgrEbda Media LowBios Brd2 Cache0 Driver PostDrv Dma1 Irq1 Vec Brd4 Time0 Kbd1 Speed Com Vid0 Par PciEnum Vid1 Redir Brd6 Com KbdBuf SMM
General Software Firmbase[r] SMM Kernel 1.3.2 Feb 11 2005 11:51:07
Intel(R) E7320 Performance Development Platform


EIST: Enhanced Intel Speedstep Driver, V3.0.
EIST: Copyright (C) 2003-2006 General Software, Inc.
EIST: Built Mar 3 2006, 14:49:27
UsbHid Pwd Msg0 Msg1 Cache1 Mem2 Prot Cache2 Flg Siz0 Msg2 Ata Dsk Npx1 Apm Err Dbg Enb App MemReduce MemSync1 Ext MemSync2 PciRom MemSync3 Setup Time1 Mfg Brd8 Com Admgr2 Cfg Brd10

DDR2 Memory 511 MB with ECC detected

Intel(R) Celeron(R) M processor 1.00GHz

BIOS ISE 5.00, Build date: 05/05/06

System Now Booting ...


Force to boot from Primary Boot Loader ...

 

ERROR # 2: Missing or Cisco-Unsupported BootLoader...
ERROR # 7: System is Rebooting due to Authentication Failure...


Nmi Npx0 Dly P92 Sha0 Kbd0 Cmos Pci Dma0 PrtB Tim Exp Rfsh Geom

Initializing memory. Please wait. Mem0 Mem1 Ebda Sha1 CacheE Admgr1 Memmgr1 AdmgrEbda Media LowBios Brd2 Cache0 Driver PostDrv Dma1 Irq1 Vec Brd4 Time0 Kbd1 Speed Com Vid0 Par PciEnum Vid1 Redir Brd6 Com KbdBuf SMM
General Software Firmbase[r] SMM Kernel 1.3.2 Feb 11 2005 11:51:07
Intel(R) E7320 Performance Development Platform


EIST: Enhanced Intel Speedstep Driver, V3.0.
EIST: Copyright (C) 2003-2006 General Software, Inc.
EIST: Built Mar 3 2006, 14:49:27
UsbHid Pwd Msg0 Msg1 Cache1 Mem2 Prot Cache2 Flg Siz0 Msg2 Ata Dsk Npx1 Apm Err Dbg Enb App MemReduce MemSync1 Ext MemSync2 PciRom

======================================

 

It keeps on cycling same way.

 

Please advise.

 

Regards

Saif

0 Replies 0