Configurig Polycom SIP phone on CUCM 7.0

[Naveen Raj Janardhan]

My organization purchased a Polycom Soundpoint IP 670 SIP phone. I would like to know how

to configure this SIP phone on CUCM 7.0 so that I can use it just like any other Cisco IP

phone. Any help on this will be greatly appreciated. Thanks.

[Jaime Valencia]

Configuring Non-Cisco SIP Phones

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_0_1/ccmcfg/b09sip3p.html

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

[Naveen Raj Janardhan]

Java, The link was very helpful. Can you please suggest what needs to be done on the 3rd party SIP phone side so that it authenticates with the CUCM?

Naveen