10-29-2010 09:06 AM - edited 03-16-2019 01:38 AM
Hello,
I would like to interconnect a Cisco Router ISDN card with Brooktrout TR1034+P2-1B (BRI). Since I need to give L1 clock from the Cisco side, is this a possible scenario?
Thanks!
met
Solved! Go to Solution.
10-29-2010 09:52 AM
Hi Met,
I have done this many times with PRI, but never BRI. It has always worked very well and is easy to set up. I think if you get the cable right everything else will work very well.
Good luck,
Art
If this helps please rate.
10-29-2010 09:10 AM
Hi,
Yes - see the attached link
http://www.cisco.com/en/US/docs/ios/12_1t/12_1t3/feature/guide/dtpri_ni.html
HTH,
Art
Please rate if this helps.
10-29-2010 09:13 AM
Hello,
I'm talking about BRI interface. Have you tried it before?
Thanks!
10-29-2010 09:24 AM
10-29-2010 09:38 AM
Thank you very much my friend.
But you think I will not have problems with source clock from Cisco, right? Good Layer1?
Thanks,
met
10-29-2010 09:52 AM
Hi Met,
I have done this many times with PRI, but never BRI. It has always worked very well and is easy to set up. I think if you get the cable right everything else will work very well.
Good luck,
Art
If this helps please rate.
10-29-2010 09:54 AM
Thank you, I'll give it a try.
+5 for the kindness!
met
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide