Hello,
my name is Florian and i am relatively new to the Cisco world and this community.
I recently purchased a used 1861 and i try to connect my 7970G to the CME.
The phone gets ip config via DHCP and option 150 but doesn't register at all.
I did this in packet tracer with 7960s several times. But in the real live i don't have any success unfortunately.
I also got some 8961s here but first i want to bring my 7970 to life.
I tried like 15 hrs to figure it out.
If someone can help me / give me a hint what i am doin wrong i would be so thankful.
My config and sh versions are below
R1#sho run
Building configuration...
Current configuration : 3275 bytes
!
! Last configuration change at 05:13:01 Berlin Mon Apr 6 2020
! NVRAM config last updated at 05:13:07 Berlin Mon Apr 6 2020
!
version 15.0
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R1
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
!
!
!
clock timezone Berlin 2
network-clock-participate wic 1
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
dot11 syslog
ip source-route
ip cef
!
!
ip dhcp excluded-address 10.2.1.1 10.2.1.99
ip dhcp excluded-address 10.1.1.1 10.1.1.99
!
ip dhcp pool dPool
network 10.2.1.0 255.255.255.0
default-router 10.2.1.1
dns-server 10.1.1.1
!
ip dhcp pool vlan1pool
import all
network 10.1.1.0 255.255.255.0
default-router 10.1.1.1
dns-server 192.168.8.1
option 150 ip 10.1.1.1
!
!
ip name-server 192.168.8.1
ip name-server 8.8.8.8
no ipv6 cef
!
!
!
!
!
multilink bundle-name authenticated
!
!
!
!
voice register global
!
!
!
!
voice-card 0
!
!
!
license udi pid C1861-SRST-B/K9 sn FHK150275ZS
vtp mode transparent
!
!
controller SHDSL 0/2/0
termination cpe
!
vlan 2,10,20
!
vlan 220
name db-energie
!
!
!
!
!
!
!
!
!
interface FastEthernet0/0
description WAN-Link
ip address dhcp
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
!
!
interface FastEthernet0/1/0
!
!
interface FastEthernet0/1/1
!
!
interface FastEthernet0/1/2
!
!
interface FastEthernet0/1/3
!
!
interface FastEthernet0/1/4
!
!
interface FastEthernet0/1/5
!
!
interface FastEthernet0/1/6
!
!
interface FastEthernet0/1/7
!
!
interface FastEthernet0/1/8
!
!
interface BRI0/1/0
no ip address
!
!
interface BRI0/1/1
no ip address
!
!
interface Vlan1
ip address 10.1.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly
!
!
ip forward-protocol nd
ip http server
ip http authentication local
no ip http secure-server
ip http path flash:
!
!
ip nat inside source list 1 interface FastEthernet0/0 overload
ip route 0.0.0.0 0.0.0.0 192.168.8.1
ip ospf name-lookup
!
access-list 1 permit 10.1.1.0 0.0.0.255
!
!
!
!
!
tftp-server flash:P00307020300.bin
tftp-server flash:/phone/7970-7971/apps70.8-3-2-27.sbn alias apps70.8-3-2-27.sbn
tftp-server flash:/phone/7970-7971/cnu70.8-3-2-27.sbn alias cnu70.8-3-2-27.sbn
!
control-plane
!
!
!
voice-port 0/0/0
!
voice-port 0/0/1
!
voice-port 0/0/2
!
voice-port 0/0/3
!
voice-port 0/1/0
!
voice-port 0/1/1
!
voice-port 0/4/0
auto-cut-through
signal immediate
input gain auto-control
description Music On Hold Port
!
!
mgcp fax t38 ecm
mgcp behavior g729-variants static-pt
!
!
!
!
!
telephony-service
max-ephones 12
max-dn 12
ip source-address 10.1.1.1 port 2000
system message Hi There!
max-conferences 4 gain -6
web admin system name admin password cisco
dn-webedit
time-webedit
transfer-system full-consult
create cnf-files version-stamp 7960 Mar 28 2020 13:31:47
!
!
ephone-dn 1
number 111
!
!
ephone-dn 2
number 222
!
!
ephone 1
device-security-mode none
mac-address 0014.A934.1947
button 1:1
!
!
!
ephone 2
device-security-mode none
mac-address 1CAA.0710.0CAF
button 1:2
!
!
!
line con 0
no modem enable
line aux 0
line vty 0 4
login
!
ntp master
ntp server 192.168.8.1
ntp server 132.163.96.5
ntp server 64.209.210.20
end
R1#sh telephony-service
CONFIG (Version=8.0)
=====================
Version 8.0
Cisco Unified Communications Manager Express
For on-line documentation please see:
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/tsd_products_support_series_home.html
protocol mode default
ip source-address 10.1.1.1 port 2000
ip qos dscp:
ef (the MS 6 bits, 46, in ToS, 0xB8) for media
cs3 (the MS 6 bits, 24, in ToS, 0x60) for signal
af41 (the MS 6 bits, 34, in ToS, 0x88) for video
default (the MS 6 bits, 0, in ToS, 0x0) for serviceservice directed-pickup
max-ephones 12
max-dn 12
max-conferences 4 gain -6
dspfarm units 0
dspfarm transcode sessions 0
conference software
privacy
no privacy-on-hold
hunt-group report delay 1 hours
hunt-group logout DND
max-redirect 10
cnf-file location: system:
cnf-file option: PER-PHONE-TYPE
network-locale[0] US (This is the default network locale for this box)
network-locale[1] US
network-locale[2] US
network-locale[3] US
network-locale[4] US
user-locale[0] US (This is the default user locale for this box)
user-locale[1] US
user-locale[2] US
user-locale[3] US
user-locale[4] US
srst mode auto-provision is OFF
srst ephone template is 0
srst dn template is 0
srst dn line-mode single
time-format 12
date-format mm-dd-yy
timezone 0 Greenwich Standard Time
no transfer-pattern is configured, transfer is restricted to local SCCP phones only.
R1#dir flash:
Directory of flash:/
1 -rw- 840 Mar 11 2020 22:10:06 +02:00 vlan.dat
2 -rw- 44471336 Jun 30 2011 16:27:14 +02:00 c1861-advipservicesk9-mz.150-1.XA1.bin
3 -rw- 49009680 Jun 3 2014 12:49:42 +02:00 c1861-advipservicesk9-mz.151-4.M6.bin
129744896 bytes total (36253696 bytes free)
sh version
Cisco IOS Software, C1861 Software (C1861-ADVIPSERVICESK9-M), Version 15.0(1)XA1, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Fri 18-Dec-09 14:25 by prod_rel_team
ROM: System Bootstrap, Version 12.4(11r)XW3, RELEASE SOFTWARE (fc1)
R1 uptime is 3 weeks, 8 hours, 42 minutes
System returned to ROM by power-on
System restarted at 20:31:53 Berlin Sun Mar 15 2020
System image file is "flash:c1861-advipservicesk9-mz.150-1.XA1.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Cisco C1861-SRST-B/K9 (MPC8358) processor (revision 0x300) with 249856K/12288K bytes of memory.
Processor board ID FHK150275ZS
MPC8358 CPU Rev: Part Number 0x804A, Revision ID 0x20
12 User Licenses
1 DSL controller
10 FastEthernet interfaces
2 ISDN Basic Rate interfaces
1 Virtual Private Network (VPN) Module
4 Voice FXS interfaces
1 Voice MoH interface
128K bytes of non-volatile configuration memory.
126976K bytes of ATA CompactFlash (Read/Write)
License Info:
License UDI:
-------------------------------------------------
Device# PID SN
-------------------------------------------------
*0 C1861-SRST-B/K9 FHK150275ZS
Configuration register is 0x2142
