cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
162
Views
0
Helpful
0
Replies

Debug output format issue on Cisco ISR Router

lana1
Level 1
Level 1

Hi

Lately this happend, when I send command debug isdn q931 on Cisco ISR4331 router.

Initiate call and as a result the outcome is not any more friendly but:

010217: Jun 12 14:13:55.874: ISDN Se0/1/0:15 Q931d: srl_send_l3_pak:
source_id = CCM MANAGER 0x0003, dest_id = Q.921 0x0000, prim = DL_DATA_REQ 0x0240
priv_len = 4 int_id = 0x0x7F40F6CE1780 datasize = 56
010218: Jun 12 14:13:55.874: ISDN Se0/1/0:15 Q931d: data =
010219: Jun 12 14:13:55.874: 00007F40F6CE17810000000302400400
010220: Jun 12 14:13:55.874: 000100000802040705A104038090A318
010221: Jun 12 14:13:55.874: 03A983816C06009134303036700A8030
010222: Jun 12 14:13:55.874: 3439373834303036....

Please I want to seen the outcome in this format, as below!! 

 Jun 10 09:24:33.873: ISDN Se0/1/0:15 Q931: TX -> SETUP pd = 8 callref = 0x002D
Sending Complete
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98381
Exclusive, Channel 1
Calling Party Number i = 0x0081, '2002'
Plan:Unknown, Type:Unknown
Called Party Number i = 0x80, '023000001'
Plan:Unknown, Type:Unknown

I was looking around but did not find a fix to help me!

Thnx

0 Replies 0