12-01-2008 03:17 PM - edited 03-15-2019 02:51 PM
Humm.. I still need help...
Trying to configure the Moh .... I just can hear a bip bip ....
I already configured as configuration guide showed...
What's wrong ?
Thanks.
---
#sh run | begin scc
sccp local GigabitEthernet0/0
sccp ccm 10.2.41.22 identifier 1
sccp
!
sccp ccm group 1
bind interface GigabitEthernet0/0
associate ccm 1 priority 1
associate profile 1 register mtp002333b11be0
associate profile 3 register jcbcnf
associate profile 2 register jcbxcd
keepalive retries 5
!
dspfarm profile 2 transcode
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
maximum sessions 5
associate application SCCP
!
dspfarm profile 3 conference
codec g711ulaw
codec g711alaw
R_JCB_22#show dspfarm all
Dspfarm Profile Configuration
Profile ID = 2, Service = TRANSCODING, Resource ID = 2
Profile Description :
Profile Admin State : UP
Profile Operation State : RESOURCE ALLOCATED
Application : SCCP Status : ASSOCIATION IN PROGRESS
Resource Provider : FLEX_DSPRM Status : UP
Number of Resource Configured : 5
Number of Resource Available : 5
Codec Configuration
Codec : g711ulaw, Maximum Packetization Period : 30
Codec : g711alaw, Maximum Packetization Period : 30
Codec : g729ar8, Maximum Packetization Period : 60
Codec : g729abr8, Maximum Packetization Period : 60
Dspfarm Profile Configuration
Profile ID = 3, Service = CONFERENCING, Resource ID = 3
Profile Description :
Profile Admin State : UP
Profile Operation State : ACTIVE
Application : SCCP Status : ASSOCIATED
Resource Provider : FLEX_DSPRM Status : UP
Number of Resource Configured : 4
Number of Resource Available : 4
Codec Configuration
Codec : g711ulaw, Maximum Packetization Period : 30 , Transcoder: Not Required
Codec : g711alaw, Maximum Packetization Period : 30 , Transcoder: Not Required
Codec : g729ar8, Maximum Packetization Period : 60 , Transcoder: Not Required
Codec : g729abr8, Maximum Packetization Period : 60 , Transcoder: Not Required
Dspfarm Profile Configuration
Profile ID = 1, Service = MTP, Resource ID = 1
Profile Description :
Profile Admin State : UP
Profile Operation State : RESOURCE ALLOCATED
Application : SCCP Status : ASSOCIATION IN PROGRESS
Resource Provider : FLEX_DSPRM Status : UP
Number of Resource Configured : 5
Number of Resource Available : 5
Hardware Configured Resources : 5
Hardware Available Resources : 5
Software Resources : 0
Codec Configuration
Codec : g711ulaw, Maximum Packetization Period : 30
SLOT DSP VERSION STATUS CHNL USE TYPE RSC_ID BRIDGE_ID PKTS_TXED PKTS_RXED
1 1 1.1.1 UP N/A FREE mtp 1 - - -
1 1 1.1.1 UP N/A FREE mtp 1 - - -
1 1 1.1.1 UP N/A FREE mtp 1 - - -
1 1 1.1.1 UP N/A FREE mtp 1 - - -
1 1 1.1.1 UP N/A FREE mtp 1 - - -
1 1 1.1.1 UP N/A FREE xcode 2 - - -
1 1 1.1.1 UP N/A FREE xcode 2 - - -
1 1 1.1.1 UP N/A FREE xcode 2 - - -
1 2 8.4.7 UP N/A FREE xcode 2 - - -
1 2 8.4.7 UP N/A FREE xcode 2 - - -
1 3 1.1.1 UP N/A FREE conf 3 - - -
1 3 1.1.1 UP N/A FREE conf 3 - - -
1 4 1.1.1 UP N/A FREE conf 3 - - -
1 4 1.1.1 UP N/A FREE conf 3 - - -
Total number of DSPFARM DSP channel(s) 14
12-01-2008 03:35 PM
and exactly what are you trying to do?????????
if it's multicast MOH i don't see anywhere that config
i only see CFB and XCODER in there
also what you're mentioning is caused because the phone has no access to the MOH server thru the MRGL, not because of a config on the router.
you don't even mention if this is CUCM or CME so i'm going to assume it's CUCM
HTH
java
if this helps, please rate
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide