cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
5044
Views
0
Helpful
1
Replies

Editting the /etc/hosts file in CallManager 6 7 etc

n.warburton
Beginner
Beginner

Hi, not sure if this is a silly question, but I'll ask it anyway.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/dma/7_1_2/dmaug712.html states the following line...

"Uncheck the check box if you want to configure all hosts manually in /etc/hosts or if you have configured DHCP to provide your DNS client information."

So if you are building a cluster without DNS being configured and you have H323 gateways listed by name how do you modify the /etc/hosts file (without going though the backdoor, unless thats the only way).

In CCM4 you could just modify the hosts file and populate with all your H323 device names and bingo all was well, but the import process doesnt pull across all your lovely hosts from CCM4.

So had a look and lots of documents state the above message in the link above, but I cant find out where you do it.

Anyone know the answer?

1 Reply 1

htluo
Engager
Engager