02-08-2017 02:41 PM - edited 03-17-2019 09:28 AM
Hello
Still new here to cisco so please excuse my ignorance.
I have a cisco UC520 running CME 7.0, I dont currently have a computer with a serial connection to console to use CLI to customize the phones so i have downloaded Background deployment 3.
It seems im unable to connect to the call manger. i use the call manager address of 10.1.1.1 and it seems to never connect. however if i point my browser to that address. i can log in and get the home page?
everything i find suggests i have to authenticate the program but it seems to be related to CUCM.
i use CCA and connect and make changes just fine. but i have noticed the Phone customization sections have an error "The embedded TFTP server cannot start or is not reachable"
Solved! Go to Solution.
02-08-2017 03:30 PM
I don't know of any tool for background config on CME.
You will need to use CLI.
02-08-2017 02:59 PM
If you mean the tool from voip integration, it's not meant to be used with CME, the requirements specify CUCM 5.0 or later.
CME is NOT the same as CUCM.
02-08-2017 03:17 PM
Ah okay. thank you for the reply.
what would you suggest? or is CLI the only way for the CME?
02-08-2017 03:30 PM
I don't know of any tool for background config on CME.
You will need to use CLI.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide