Integrating CUPC without CUPS

[Martin Diaz]

Can I integrate CUPC client with users devices if I don´t have CUPS? I have CUCMBE 5000 with CUWL licensing and CUCM 8.5.1 with Unity Connections coresident in the server.

[Jaime Valencia · Accepted solution]

No, you cannot:

Required Servers

The following servers are required for Cisco Unified Personal  Communicator operation:

•Cisco Unified  Communications Manager is installed in your network and configured to  handle call processing and point to point video. It provides  Cisco Unified IP Phone control through the Cisco Unified  Communications Manager computer telephony interface (CTI). It is not  required to enable IP telephony for Cisco Unified Personal Communicator  users, but those users will not have telephony capabilities. For  Cisco Unified Communications Manager details, see the following URL:

http://www.cisco.com/en/US/products/sw/voicesw/ps556/tsd_products_support_series_home.html

•Cisco Unified Presence is  installed and is operational. This server provides the Cisco Unified  Personal Communicator client configuration and presence information. For  Cisco Unified Presence details, see the following URL:

http://www.cisco.com/en/US/products/ps6837/tsd_products_support_series_home.html

•LDAP/Active Directory server

http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cupc/8_5/english/release/notes/cupc85.html

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

[Martin Diaz]

Thanks for your answer. Just one more question. If I have CUCM 8.5.1 with CUC coresident in the server (MCS7828, CUCMBE 5000), can I install CUPS software on the same  server? Or I require one aditional server?

[yenlung]

You would need an addition server.

Sent from Cisco Technical Support iPhone App