Integration CM and Huawei AR2200 router with E1 and fxo
Hi all, I have CUCM 8.6 with h323 gateways for branches. It branch (cisco router) has E1 and FXO lines to make external call (dial-peer voice pots) and dial-peer voice voip to route calls to main office or between branches . So far , so goog.
Now we are installing new Huawei AR2200, to work as redundancy for Cisco router one, in case cisco fails or whatever. Need some help how to define the dual for dial-peer voice, voice-port , controller E1 and how to set them up. Seems to be similar to cisco but it does not.
Check out this adoption toolkit for Cisco Webex Meetings. Start having workflow-based conversations with executives and executive admins.
This package includes links to collateral such as step-by-step discovery instructions, a communications plan templat...
Table of Contents:
1. Reference URLs
2. Type of Certificates
3. Regenerate certificates that have no CTL/ITL impact [no phone impact]
4. Regenerate certificates that have CTL/ITL impact [medium phone impact]
5. Step to delete expired certif...
I have been using the recent release of the WebEx Desktop App (39.9) which has Wireless Sharing feature. Prior to this, we were using the proximity application for sharing, where we can find the performance logs on the %temp% folder of the client machine....
Cisco Recommends Dual NIC deployment for Expressways. But single NIC deployment can be achieved. Points to be noted for single NIC: > Firewall must support NAT Reflection, if not then you can use dual NATing to achieve NAT reflection on unsup...