06-16-2009 11:22 AM - edited 03-15-2019 06:33 PM
Hi Forum,
I have the requirement to connect a CUCM to an ISR Router (e.g. 28xx) via a SIP Trunk.
Of course, this shouldn't be a problem.
BUT. I need to authenticate the gateway to the cucm via SIP-digest (please don't ask why :-).
On CCO I found out, that a authentification on a CUCM sip-trunk should be possible (see on: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/security/6_1_1/secugd/secrealm.html#wp1070945)
I was wondering what has to be done on the ISR gateway. Is this possible and when yes what has to be configured??
Best regards.
Torsten.
06-16-2009 12:09 PM
Torsten,
Please refer to the following link in how to configure digest auth for SIP in IOS.
Thanks,
06-22-2009 11:27 PM
Hi Parshah,
sorry for my late reply. Thanks for your link it helped me a lot.
Cheers
Torsten.
06-23-2009 09:20 AM
Torsten,
Glad to know it helped you out. If the link helped answer your questions kindly update the thread to denote that.
Thanks,
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide