Meet me with passcode configuration

[Anthony Vinod]

Hello Team,

I am working on 1 of my client issue where CUCM is corrupted and lost drs too because of which we have to build entire setup

Customer is saying they use to have Meet me number 4050 to 4054, host will dial 4050 and goes in mute, Internal participants will dial 2095 and enter the passcode. external participants will dial XXXXXX0095 and enter passcode to join. Maximum 8 participants

Can anyone assist in configuring above feature, thanks in advance

We are having BE5k CUCM 8.6

[Jitender Bhandari]

Hi Anthony

Not possible with CUCM 8.6 and CUCM only, however there is a twisted configuration that can be done using Unity, see below for help.

https://www.youtube.com/watch?v=3OJQPwSwyRs

(Rate if it helps)

JB

[Anthony Vinod]

My client is saying they did the above achievement previously using cuc and cucm, but they use to join the conference using passcode, is it possible by any chance?

[Jitender Bhandari · Accepted solution]

Hi Anthony,

Not possible with your CUCM version 8.X, you can user conference now if you are on CUCM 11.X which would have served the purpose.

http://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications-manager-callmanager/200181-Configure-Conference-Now-Feature-on-CUCM.html

(Rate if it helps)

JB

[Anthony Vinod]

Ok, thanks for your response JB

[Jitender Bhandari]

Happy to help Anthony,

You can mark it as answered if you doen have further questions.

JB