Hi,
I had VWIC2-1MFT-T1/E1 on my router 2811. On the other side is provider router (cisco).
I have changed my wic card with VWIC2-2MFT-T1/E1. Now I got error:
*Oct 17 07:08:08.529: ISDN Se0/0/0:15 Q931: SETUP pd = 8 callref = 0x0085
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98381
Exclusive, Channel 1
Calling Party Number i = 0x2181, '16500904'
Plan:ISDN, Type:National
Called Party Number i = 0xA1, '0913885126'
Plan:ISDN, Type:National
*Oct 17 07:08:08.541: ISDN Se0/0/0:15 Q921: User RX <- RR sapi=0 tei=0 nr=11
*Oct 17 07:08:08.577: ISDN Se0/0/0:15 Q921: User RX <- INFO sapi=0 tei=0, ns=15 nr=11
*Oct 17 07:08:08.577: ISDN Se0/0/0:15 Q931: CALL_PROC pd = 8 callref = 0x8085
Channel ID i = 0xA98381
Exclusive, Channel 1
*Oct 17 07:08:08.577: ISDN Se0/0/0:15 Q921: User TX -> RR sapi=0 tei=0 nr=16
*Oct 17 07:08:08.593: ISDN Se0/0/0:15 Q921: User RX <- INFO sapi=0 tei=0, ns=16 nr=11
*Oct 17 07:08:08.593: ISDN Se0/0/0:15 Q931: DISCONNECT pd = 8 callref = 0x8085
Cause i = 0x82A6 - Network out of order
After some testing (didn't work anything), I have returned the old card but it was the same problem.
Why is that so and what I can do now?
Thanks
