07-06-2008 10:55 AM - edited 03-15-2019 11:46 AM
Dear all
I have connected MD110 Ericsson to cisco vocie gateway 2821.
the router is also connected via Ethernet to another router
the router B is also connected to another PBX(B).
the PBX(B) users want to hear PSTN dial tone.but nothing to hear!!
Router B:
dial-peer voice 9 voip
destination-pattern 9
session target ipv4:1.1.1.1(router A)
-------------------
router A:
dial-peer voice 10 pots
destination-pattern 9
forward digit all
port 0/2/0:15 (e1 port to pbx a )
------------------------------
whit this configure everything works but no PSTN dial tone
please help me.
07-06-2008 03:39 PM
What u mean with PSTN dial tone?
MD110 -- 2821 -- Router B -- PBXB
Please clarify
07-06-2008 11:21 PM
ok..when you want to call with ordinary phones you can hear DIAL TONE from the PSTN then you will dial your destination number.
MD110 is erricson PBX.
I want that when a user is behind PBX B and dials "9" to access outside via PBX A. it can hear PSTN Dial TOne.
let me know if there is further questions
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide