I live in a place with frequent power outages. I don't mind losing the phone for few minutes, but the problem is that after SPA2102 reboots, the phone line is not working.
After much investigation, it seems that it's happening because SPA2102 boots before cable modem is ready. Because of that SPA2102 cannot obtain an IP from DHCP. I cannot set a static IP on it because my ISP does not provide it.
My SPA2102 is working in a bridge mode and is located between internet cable modem and home router.
Interestingly, after the reboot, the Internet and the home router seem to be working fine, only the phone line is not working.
Manually rebooting SPA2102 once the cable modem is ready fixes the problem.
Is there any way to resolve this timing issue by somehow delaying SPA2102 boot, or delaying DHCP connection, or delaying line setup?
I found a hacky workaround to the problem. My goal was to delay obtaining IP from DHCP until cable modem is up. Now, SPA2102 has number of modes:
I knew that PPPOE wouldn't work, but it would probably take time to try. This is the time that i needed for cable modem to come up. So, i set my SPA2102 to "PPPOE, DHCP" mode, and now it works like charm, and survives the outages.
Les stations de radio en ligne sont devenues l'une des formes de partage des médias les plus populaires dans la ecouter radio en ligne société d'aujourd'hui. La radio Internet est maintenant disponible sur tous les principaux modems de câbles et sans fil ...
This document describes the details about the Cisco Collaboration Endpoint software upgrade error “File too large”, and guides through the possible workarounds to upgrade the endpoint to the desired version.
we have recently announced a new Webex Events service with a best-in-class virtual event experience that is video-centric, intelligent, and simple to use.
Some highlights (features of new Webex Events that were not there with existing/c...
The purpose of this document is to present the different troubleshooting steps to take when some service from the Cisco IM & Presence Service Server have not started gracefully.
The States of a service
The IM&P ...
This event had place on Tuesday 20th, April 2021 at 10hrs PDT
What is the Real-Time Monitoring Tool (RTMT) and how do I use it? In addition to an overview of the components of the tool and the interface, attendees learned how to use ...