09-06-2011 12:25 PM - edited 03-16-2019 06:51 AM
Does anyone know if it's possible to customize the system message by individual phone or can it be eliminated altogether?
09-09-2011 02:21 PM
Chris,
Can you provide some more information.
What system is your phones using
CUCM, CME etc
Alex
09-25-2011 05:50 PM
Alex,
It's a UC540.CCA 3.1(1) 8.2 software pack.
09-26-2011 10:03 AM
The system message is an all phones feature. If you want to disable it I think you can just insert a space as the system message, if not then perhaps something like a period which would mostly go un-noticed.
Keith
09-28-2011 04:24 AM
Hi Chris,
Sorry for the delay
As Keith shows.
Either using cli
!
conf t
!
telephony-service
system message . (Or a SPACE you need to use a single character)
!
Or from the GUI
Configure ---> Sytem message
PS,
!
conf t
!
telephony-service
no system message
!
This will show the DEFAULT CISCO SYTEM MESSAGE
So that wont do what you want.
HTH
Alex
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide