Hi all,
I have CME connected to Telco via SIP trunk, the SIP provider uses g.711alaw and I need to configure Tcl for AA, and Tcl should be configured to use G711ulaw so that I configured MTP but any time I am trying to call the AA the Tcl answers me but with “ Your call will be disconnected” message rather than welcome message.
Any body can help?
Below my config:
application
service autoatt flash:its-CISCO.2.0.1.0.tcl
paramspace english index 0
paramspace english language en
param operator 0
paramspace english location flash:
paramspace english prefix en
param aa-pilot 5231777
!
dial-peer voice 1 voip
translation-profile outgoing OUT
destination-pattern .T
rtp payload-type cisco-codec-fax-ack 105
rtp payload-type nte 97
session protocol sipv2
session target ipv4:SIP-Provider
session transport udp
incoming called-number 523.
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte digit-drop
codec g711alaw
no vad
!
dial-peer voice 2 voip
description For AA
service autoatt
session target ipv4:192.168.1.254
incoming called-number 5231777
dtmf-relay h245-alphanumeric
codec g711ulaw
no vad
!
I tried to use debug voip application script: and I got the following:
*Sep 25 10:12:55.335: //54331//TCL :/tcl_PutsObjCmd: proc act_Setup
*Sep 25 10:12:55.335:
*Sep 25 10:12:55.335: //54331//TCL :/tcl_PutsObjCmd:
proc init_perCallvars
*Sep 25 10:12:55.335:
*Sep 25 10:12:55.335: //54331//TCL :/tcl_PutsObjCmd:
ANI 955842865
*Sep 25 10:12:55.335:
*Sep 25 10:12:55.335: //54331//TCL :/tcl_PutsObjCmd:
DNIS 5231777
*Sep 25 10:12:55.335:
*Sep 25 10:12:55.335: //54331//TCL :/tcl_PutsObjCmd:
No DNIS
*Sep 25 10:12:55.335:
*Sep 25 10:12:55.339: //54331//TCL :/tcl_PutsObjCmd:
proc act_GotDest
*Sep 25 10:12:55.339:
*Sep 25 10:12:55.339: //54331//TCL :/tcl_PutsObjCmd:
Call got event cd_010 collecting destination
*Sep 25 10:12:55.339:
*Sep 25 10:12:55.339: //54331//TCL :/tcl_PutsObjCmd:
proc act_Select
*Sep 25 10:12:55.339:
*Sep 25 10:12:55.339: //54331//TCL :/tcl_PutsObjCmd:
proc act_GotDest
*Sep 25 10:12:55.339:
*Sep 25 10:12:55.339: //54331//TCL :/tcl_PutsObjCmd:
Call got event cd_010 collecting destination
*Sep 25 10:12:55.339:
*Sep 25 10:12:55.339: //54331//TCL :/tcl_PutsObjCmd:
proc act_Select
*Sep 25 10:12:55.339:
*Sep 25 10:12:55.339: //54331//TCL :/tcl_PutsObjCmd:
proc act_GotDest
*Sep 25 10:12:55.339:
*Sep 25 10:12:55.339: //54331//TCL :/tcl_PutsObjCmd:
Call got event cd_010 collecting destination
*Sep 25 10:12:55.339:
*Sep 25 10:12:55.339: //54331//TCL :/tcl_PutsObjCmd:
proc act_Select
*Sep 25 10:12:55.339:
*Sep 25 10:12:55.339: //54331//TCL :/tcl_PutsObjCmd:
proc act_GotDest
*Sep 25 10:12:55.339:
*Sep 25 10:12:55.339: //54331//TCL :/tcl_PutsObjCmd:
Call got event cd_010 collecting destination
*Sep 25 10:12:55.339:
*Sep 25 10:12:55.339: //54331//TCL :/tcl_PutsObjCmd:
proc act_Select
*Sep 25 10:12:55.339:
*Sep 25 10:12:55.339: //54331//TCL :/tcl_PutsObjCmd:
proc act_GotDest
*Sep 25 10:12:55.339:
*Sep 25 10:12:55.339: //54331//TCL :/tcl_PutsObjCmd:
Call got event cd_010 collecting destination
*Sep 25 10:12:55.339:
*Sep 25 10:12:55.339: //54331//TCL :/tcl_PutsObjCmd:
proc act_Select
*Sep 25 10:12:55.339:
*Sep 25 10:12:55.339: //54331//TCL :/tcl_PutsObjCmd:
proc act_GotDest
*Sep 25 10:12:55.339:
*Sep 25 10:12:55.339: //54331//TCL :/tcl_PutsObjCmd:
Call got event cd_010 collecting destination
*Sep 25 10:12:55.339:
*Sep 25 10:12:55.339: //54331//TCL :/tcl_PutsObjCmd:
proc act_Select
*Sep 25 10:12:55.339:
*Sep 25 10:12:55.343: //54331//TCL :/tcl_PutsObjCmd:
proc act_GotDest
*Sep 25 10:12:55.343:
*Sep 25 10:12:55.343: //54331//TCL :/tcl_PutsObjCmd:
Call got event cd_010 collecting destination
*Sep 25 10:12:55.343:
*Sep 25 10:12:55.343: //54331//TCL :/tcl_PutsObjCmd:
proc act_Select
*Sep 25 10:12:55.343:
*Sep 25 10:12:55.343: //54331//TCL :/tcl_PutsObjCmd:
proc act_DestBusy
*Sep 25 10:12:55.343:
Thanks in advanced.
