I am having issue with WMI for the following scenario.
I am having couple of sites but each site uses 4 digit extension. It uses 2 digit access code to call each other site. And we are planning to use a single unity connection server for all site. Following is my configuration,
Partition
p_primary
p_vm
p_wmi
p_vm2phone
CSS
css_all - p_primary , p_vm
css_vm - p_vm2phone, p_wmi
css_vm2phone - p_primary
css_wmi - p_vm2phone
Phone extension is 4 digit 2XXX and Site A's access code is 65. Then the configuration is as follows,
Phone
ext 2000 : p_primary and css_all
Voice Mail Profile
Voice mail Mask : 65XXXX
Voice Mail Pilot
3100 css_all
Hunt Pilot
3100 p_primary
VoiceMail Ports :
3010 - p_vm and css_vm
MWI
3000 - p_wmi and css_wmi
Translation Pattern
65XXXX to XXXX
p_vm2phone and css_vm2phone
At Unity connection creating user with full 6 digit extension ( 2 digit access code + 4 digit extension ) to avoid overlapping.
user extension 652000
MWI indication
Inherit User's Extension
Extension : 652000
I do not have any problem with leaveing message or accessing message. Only problem i have is MWI is not working. Unless i need to configure the MWI indication Extension to exact 4 digit number and allow WMI css_mwi to access p_primary on the CUCM.
Any advise how i can use the full 6 digit number for WMI indication ?
thanks
