VG224 configuration with CCME3.3

[hanson.stanley]

Hi,

I am trying to configure a VG224 with a CCME3.3 router.I need call transfer facility from analog phones that r connected to this VG224.I am configuring VG224 as a SCCP gateway.

i have tried to configure sccp in VG224.what i have done in VG224 is ;

#conf t

#sccp local <interface>

#sccp ccm <ipaddress of ccme> identifier 1 version 3.3

#sccp

#sccp ccm group<groupnumber>

#associate ccm 1 priority 1

#exit

When i have typed the "#show sccp" command;

this message shows....

"sccp parameters are not activated (dspfarm profiles)or not associated with ccm group"

I have dsp module in CCME router..

Can anyone please help me with the detailed configuration??

I am stuck with this..

please please please help me with this....

Thanks in advance.............

[Jaime Valencia]

i do not see the following:

stcapp ccm-group 1

stcapp

dial-peer voice 1 pots

service stcapp

port 2/1

HTH

javalenc

if this helps, please rate

[hanson.stanley]

Hi,

Thanks for the quick reply..i have to try this in customer place and after that ill let you know the results..thank you very much for the reply.....