cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1314
Views
0
Helpful
0
Replies
Highlighted
Beginner

ISIS IPv6 under VRF

I have 6500E with Sup 2T, running the latest IOS 15.2.1SY1, I'm trying to configure ISIS IPv6 under VRF lite, but I'm getting an error message.

 

test(config-if)# ip router isis
%ISIS: Cannot enable ISIS-IP for process with mismatched vrf
test(config-if)# ipv6 address x.x.x.x.x
test(config-if)# ipv6 enable
test(config-if)# ipv6 router isis
%ISIS: Cannot enable ISIS-IPv6 for non-default VRF interface
test(config-if)# mpls mtu 9000
test(config-if)# mpls traffic-eng tunnels
test(config-if)# mpls ip

test(config-if)# isis ipv6 metric 4000
% ISIS IPv6 not supported on VRF interfaces

 

Is this feature supported in that IOS, the feature navigator is not helpful at all..

 

This link shows the support for 15M&T but not sure about the SY

 

http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_isis/configuration/15-mt/irs-15-mt-book/irs-ipv6-multi-process-support.html

 

Thanks

0 REPLIES 0