RV160 VPN Config using IPv6

[jamescisco]

I have several site to site VPN configurations created on the RV160 router that are working fine.  They are all built utilizing IPv4.  What I want to know is if it is possible building these site to site VPN connections utilizing IPv6. I don't see any options for building these site to site tunnels using IPv6 as the network being created is pure IPv6.

[balaji.bandi]

have you look at this document IPv6 transtion :

https://www.cisco.com/c/en/us/support/docs/smb/routers/cisco-rv-series-small-business-routers/Configure-IPv6-transition-on-RV160-and-RV260.html

[jamescisco]

Thanks for the feedback.  Unfortunately, this just appears to be the IPv4 transition technology where IPv6 is being encapsulated.  From what I am seeing, this is not truly a fully compliant IPv6 router as it does not have the IPv6 VPN capacity.  When I purchased this, it was with the intent to run this on a full IPv6 network with no IPv4.  It does not appear that I can do so and create VPN tunnels.  I am going to see if I can return it.  Thanks again!