ME3600 doens't work BRIDGE::MIB

[JevgenijSabaliauskas]

Hi,

we get new ME3600 switch. But it has one problem. It doesn't support BRIGE::MIB (1.3.6.1.2.1.17.4.3.1.2) as it should be.

According this document:

http://www.cisco.com/en/US/docs/switches/metro/me3600x_3800x/software/release/12.2_52_ey/configuration/guide/swmibs.html

Everithing should work as it use to be:

For VLAN1 we use out usual community for example:

snmp-server community monitoring RO

So for all other VLAN we use monitoring@X , where X is VLAN number.

But in ME3600 no such feature, there is only onformation for VLAN1, so it is impossible to track MAC address from all VLAN exept VLAN1.

We use lots of other CIsco models in our network and everithing works ok (from  BRIDGE::MIB point i mean : ) )

Is it BUG? is there any workaround?

Does anyone meet similar trouble?

Regards,

Jevgenij

[JevgenijSabaliauskas]

Info from Cisco documentation:

http://www.cisco.com/en/US/docs/switches/metro/me3600x_3800x/software/release/12.2_52_ey/configuration/guide/swmibs.html

MIB List

•BGP4-MIB

•BRIDGE-MIB

---

Note The  BRIDGE-MIB supports the context of a single VLAN. By default, SNMP  messages using the configured community string always provide  information for VLAN 1. To obtain the BRIDGE-MIB information for other  VLANs, for example VLAN x, use this community string in the SNMP  message: configured community string @x.

http://www.cisco.com/en/US/docs/switches/metro/me3600x_3800x/software/release/12.2_52_ey/configuration/guide/swmibs.html