VLAN Management

[mansoor_nawaz78]

How we can share a Bandwidth in a VLAN,

I mean share a Bandwidth in a single VALN Client,

can we do it through a IOS configuration or is there any hardware for this solution,

Note: Currently we are using L3(3550) & L2(2950) switches.

Thank You

[ankurbhasin]

Hi Mansoor,

On 3550 you can configure traffic-policing policies on the switch port for managing how much of the port bandwidth should be allocated to a specific traffic flow

http://www.cisco.com/en/US/products/hw/switches/ps646/products_configuration_guide_chapter09186a00801f0a4b.html

http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12120ea2/3550scg/swqos.htm#wp1024977

Just go through these links and see if this satisfies your requirement.

HTH, if yes please rate the post.

Ankur