cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1081
Views
0
Helpful
1
Replies

Authentication Fail?

Danilo Dy
VIP Alumni
VIP Alumni

Hi,

I'm having problem connecting my router to the sp.

I turned on debug ppp auth and debug ppp neg. Below are the debug output, can anyone help to determine what is the problem?

Oct 10 14:51:16.674: Vi1 AUTH: Timeout 1

Oct 10 14:51:16.674: Vi1 PAP: Using hostname from interface PAP

Oct 10 14:51:16.674: Vi1 PAP: Using password from interface PAP

Oct 10 14:51:16.674: Vi1 PAP: O AUTH-REQ id 107 len 29 from "username"

Oct 10 14:51:26.690: Vi1 AUTH: Timeout 2

Oct 10 14:51:26.690: Vi1 PAP: Using hostname from interface PAP

Oct 10 14:51:26.690: Vi1 PAP: Using password from interface PAP

Oct 10 14:51:26.690: Vi1 PAP: O AUTH-REQ id 108 len 29 from "username"

Oct 10 14:51:36.706: Vi1 AUTH: Timeout 3

Oct 10 14:51:36.706: Vi1 PAP: Using hostname from interface PAP

Oct 10 14:51:36.706: Vi1 PAP: Using password from interface PAP

Oct 10 14:51:36.706: Vi1 PAP: O AUTH-REQ id 109 len 29 from "username"

Oct 10 14:51:46.690: Vi1 PAP: I AUTH-NAK id 109 len 26 msg is "Authentication failed"

Oct 10 14:51:46.694: Vi1 LCP: I TERMREQ [Open] id 4 len 4

Oct 10 14:51:46.694: Vi1 LCP: O TERMACK [Open] id 4 len 4

Oct 10 14:51:46.694: Vi1 PPP: Sending Acct Event[Down] id[131]

Oct 10 14:51:46.694: Vi1 PPP: Phase is TERMINATING

Oct 10 14:51:46.698: %DIALER-6-UNBIND: Interface Vi1 unbound from profile Di1

Oct 10 14:51:46.706: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to down

Oct 10 14:51:46.722: Vi1 LCP: State is Closed

Oct 10 14:51:46.722: Vi1 PPP: Phase is DOWN

Oct 10 14:52:08.706: Vi1 PPP: Phase is DOWN, Setup

Oct 10 14:52:08.710: %DIALER-6-BIND: Interface Vi1 bound to profile Di1

Oct 10 14:52:08.714: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to up

Oct 10 14:52:08.714: Vi1 PPP: Treating connection as a callout

Oct 10 14:52:08.714: Vi1 PPP: Phase is ESTABLISHING, Active Open

Oct 10 14:52:08.714: Vi1 PPP: Authorization NOT required

Oct 10 14:52:08.714: Vi1 PPP: No remote authentication for call-out

Oct 10 14:52:08.718: Vi1 LCP: O CONFREQ [Closed] id 1 len 10

Oct 10 14:52:08.718: Vi1 LCP: MagicNumber 0x132A0FF2 (0x0506132A0FF2)

Oct 10 14:52:08.722: Vi1 LCP: I CONFACK [REQsent] id 1 len 10

Oct 10 14:52:08.722: Vi1 LCP: MagicNumber 0x132A0FF2 (0x0506132A0FF2)

Oct 10 14:52:10.702: Vi1 LCP: I CONFREQ [ACKrcvd] id 2 len 18

Oct 10 14:52:10.702: Vi1 LCP: MRU 1492 (0x010405D4)

Oct 10 14:52:10.702: Vi1 LCP: AuthProto PAP (0x0304C023)

Oct 10 14:52:10.702: Vi1 LCP: MagicNumber 0x8478E237 (0x05068478E237)

Oct 10 14:52:10.706: Vi1 LCP: O CONFNAK [ACKrcvd] id 2 len 8

Oct 10 14:52:10.706: Vi1 LCP: MRU 1500 (0x010405DC)

Oct 10 14:52:10.710: Vi1 LCP: I CONFREQ [ACKrcvd] id 3 len 18

Oct 10 14:52:10.710: Vi1 LCP: MRU 1500 (0x010405DC)

Oct 10 14:52:10.710: Vi1 LCP: AuthProto PAP (0x0304C023)

Oct 10 14:52:10.710: Vi1 LCP: MagicNumber 0x8478E237 (0x05068478E237)

Oct 10 14:52:10.710: Vi1 LCP: O CONFACK [ACKrcvd] id 3 len 18

Oct 10 14:52:10.714: Vi1 LCP: MRU 1500 (0x010405DC)

Oct 10 14:52:10.714: Vi1 LCP: AuthProto PAP (0x0304C023)

Oct 10 14:52:10.714: Vi1 LCP: MagicNumber 0x8478E237 (0x05068478E237)

Oct 10 14:52:10.714: Vi1 LCP: State is Open

Oct 10 14:52:10.714: Vi1 PPP: Phase is AUTHENTICATING, by the peer

Oct 10 14:52:10.714: Vi1 PAP: Using hostname from interface PAP

Oct 10 14:52:10.714: Vi1 PAP: Using password from interface PAP

Oct 10 14:52:10.714: Vi1 PAP: O AUTH-REQ id 110 len 29 from "username"

Oct 10 14:52:20.706: Vi1 AUTH: Timeout 1

Oct 10 14:52:20.706: Vi1 PAP: Using hostname from interface PAP

Oct 10 14:52:20.706: Vi1 PAP: Using password from interface PAP

Oct 10 14:52:20.706: Vi1 PAP: O AUTH-REQ id 111 len 29 from "username"

Oct 10 14:52:30.722: Vi1 AUTH: Timeout 2

Oct 10 14:52:30.722: Vi1 PAP: Using hostname from interface PAP

Oct 10 14:52:30.722: Vi1 PAP: Using password from interface PAP

Oct 10 14:52:30.722: Vi1 PAP: O AUTH-REQ id 112 len 29 from "username"

1 Reply 1

attrgautam
Level 5
Level 5

Is it possible to show the config at both ends. There can be many reasons for Auth failure. What is the auth mechanism u r trying ?