Need support to find the solution for the issue with SR policy
PE_1#sh segment-routing traffic-eng policy name TEST
Name: TEST (Color: 300 End-point: 2.2.2.2)
Owners : CLI
Status:
Admin: up, Operational: down for 01:29:18 (since 03-26 12:12:22.235)
Candidate-paths:
Preference 200 (CLI):
Dynamic (inactive)
Inactive Reason: Source node not in topology
Metric Type: IGP
Preference 100 (CLI):
Explicit: segment-list TEST (inactive)
Inactive Reason: Path cannot be resolved
Weight: 1, Metric Type: TE
Attributes:
Binding SID: 32
Allocation mode: dynamic
State: Programmed
Configuration snippet:
traaffic engineering tunnel is enabled on all interfaces
VPLS is working fine
segment-routing traffic-eng
interface Loopback0
segment-list name TEST
index 50 mpls label 16002
index 100 mpls label 16004
!
logging policy status
policy TEST
color 300 end-point 2.2.2.2
candidate-paths
preference 200
dynamic
metric
type igp
!
preference 100
explicit segment-list TEST
!
!
!
!
segment-routing mpls
Abid