Hi all, I'm trying to configure a custom VRF export map that allows me to add a MED attribute to the VPNv4 routes that I'm exporting into the VPN. I cannot seem to get the MED applied to the routes. It looks like the route-map is being ignored. Could anyone help with this? The platform is a 6500 switch.
I've include some config excerpts. Many thanks :)
vrf definition test
description test
rd 1.1.1.1:1
!
address-family ipv4
import map test-import
export map test-export
route-target export 65501:1
route-target import 65501:1
exit-address-family
route-map test-export permit 10
match ip address test-export
set metric 200
set extcommunity rt 65501:1 additive
ip prefix-list test-export seq 5 permit 1.1.1.1/30