Hi
I think I found a strange issue. When trying to run the same command twice I get "% Can't handle special action '|'. Quitting"
I only see it with this command "show mpl traffic-eng tunnels interface out teX/X/X/X | "
Even stranger is that if I alter "include" a bit everything work once.
I run a ARS 9922 with 5.3.2
RP/0/RP0/CPU0:router1#show mpl traffic-eng tunnels interface out te0/6/0/2 | i Name
Tue Nov 15 10:31:27.842 CET
Name: tunnel-te3002 Destination: 80.91.242.154 Ifhandle:0x820
Signalled-Name: temp__02
RP/0/RP0/CPU0:router1#show mpl traffic-eng tunnels interface out te0/6/0/2 | i Name
Tue Nov 15 10:31:30.852 CET
% Can't handle special action '|'. Quitting
RP/0/RP0/CPU0:router1#show mpl traffic-eng tunnels interface out te0/6/0/2 | inc Name
Tue Nov 15 10:31:34.946 CET
Name: tunnel-te3002 Destination: 80.91.242.154 Ifhandle:0x820
Signalled-Name: temp__02
RP/0/RP0/CPU0:router1#show mpl traffic-eng tunnels interface out te0/6/0/2 | inc Name
Tue Nov 15 10:31:37.119 CET
% Can't handle special action '|'. Quitting
RP/0/RP0/CPU0:router1#show mpl traffic-eng tunnels interface out te0/6/0/2 | include Name
Tue Nov 15 10:31:46.058 CET
Name: tunnel-te3002 Destination: 80.91.242.154 Ifhandle:0x820
Signalled-Name: temp__02
RP/0/RP0/CPU0:router1#show mpl traffic-eng tunnels interface out te0/6/0/2 | include Name
Tue Nov 15 10:31:48.441 CET
% Can't handle special action '|'. Quitting
RP/0/RP0/CPU0:router1#show mpl traffic-eng tunnels interface out te0/6/0/2 | i Name
Tue Nov 15 10:31:54.206 CET
% Can't handle special action '|'. Quitting
RP/0/RP0/CPU0:router1#show mpl traffic-eng tunnels interface out te0/6/0/2 | incl Name
Tue Nov 15 10:32:02.649 CET
Name: tunnel-te3002 Destination: 80.91.242.154 Ifhandle:0x820
Signalled-Name: temp__02
RP/0/RP0/CPU0:router1#show mpl traffic-eng tunnels interface out te0/6/0/2 | incl Name
Tue Nov 15 10:32:06.513 CET
% Can't handle special action '|'. Quitting
RP/0/RP0/CPU0:router1#show mpl traffic-eng tunnels interface out te0/6/0/2 | inclu Name
Tue Nov 15 10:32:10.069 CET
Name: tunnel-te3002 Destination: 80.91.242.154 Ifhandle:0x820
Signalled-Name: temp__02
RP/0/RP0/CPU0:router1#show mpl traffic-eng tunnels interface out te0/6/0/2 | incl Name
Tue Nov 15 10:32:12.842 CET
% Can't handle special action '|'. Quitting
RP/0/RP0/CPU0:router1#show mpl traffic-eng tunnels interface out te0/6/0/2 | includ Name
Tue Nov 15 10:32:19.750 CET
Name: tunnel-te3002 Destination: 80.91.242.154 Ifhandle:0x820
Signalled-Name: temp__02
RP/0/RP0/CPU0:router1#show mpl traffic-eng tunnels interface out te0/6/0/2 | includ Name
Tue Nov 15 10:32:22.635 CET
% Can't handle special action '|'. Quitting
