cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
846
Views
0
Helpful
0
Replies

Problem with Routed Pseudowire in 7600 ES+ 3C card

ingot.marulam
Level 1
Level 1

Hi All,

I got issue when configuring routed pseudowire in 7600, when the routed pseudowire traffic go trough ES+ 3C card the ping test was bad. But, if I move the same configuration so the routed pseudowire traffic go trough 7600-ES20-GE3CXL card the problem didn't there. Did anyone experienced same issue?

Any idea about this issue? Please help to share the root cause of this problem.

The configuration of SVI below:

===

interface Vlan202

mtu 9180

ip address 192.168.207.149 255.255.255.252

no ip proxy-arp

ip ospf authentication message-digest

ip ospf message-digest-key 1 md5 7 000903050F4D48091C314A0F

ip ospf network point-to-point

ip ospf dead-interval minimal hello-multiplier 3

load-interval 30

carrier-delay msec 0

mpls ip

xconnect 10.255.17.32 10202 pw-class pw-801

hold-queue 1024 in

end

===      

Thanks in advance.

0 Replies 0