02-27-2019 11:26 AM - edited 02-21-2020 11:03 AM
We were trying to determine if there is a solution to limit then number of MAC addresses learned on a port if 802.1x is deployed in multi-auth mode. I had previously read not to use 802.1x and port-security. I have also read that is not a supported solution.
Solved! Go to Solution.
02-27-2019 12:06 PM
to my knowledge cisco best practice is not to configure 1.x with port-security. unless they change this practice or i gone too old.
02-27-2019 11:43 AM
to this date there is no solution to combine the 802.1x with port security. and it still stand not combine the port-security and dot1x on same port. as port-security is at switch level and 1.x is ISE feature.
02-27-2019 12:04 PM
02-27-2019 12:06 PM
to my knowledge cisco best practice is not to configure 1.x with port-security. unless they change this practice or i gone too old.
02-27-2019 12:27 PM
02-27-2019 04:49 PM
I have read that it was not a best practice. I just wanted to make sure.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide