07-04-2013 09:11 AM - edited 03-10-2019 08:37 PM
Hi
I authenticate all my cisco switches and routers with AAA + NPS + AD
A server runs NPS service with cisco attribute shell:priv-lvl=15 or 5, depending of AD group.
But I'd like configure role based with IOS view.
When I issue the enable view command, I get
Password:
I tried with my AD password, enable configurated password, and always gets
% Authentication failed
Mi line vty config
line vty 0 4
authorization exec VTY-AAA
login authentication VTY-AAA
transport input ssh
Solved! Go to Solution.
07-04-2013 05:42 PM
Have you gone through the below listed parser view configuration example. Please check here
View authentication is performed by an external authentication server via the new attribute "cli-view-name" so you need to use cisco-av-pair as cli-view-name=xxxx
AAA authentication associates only one view name to a particular user; that is, only one view name can be configured for a user in an authentication server.
In case you still have any issues, run debug parser view and share the output, I'll try to help.
~BR
Jatin Katyal
**Do rate helpful posts**
07-04-2013 05:42 PM
Have you gone through the below listed parser view configuration example. Please check here
View authentication is performed by an external authentication server via the new attribute "cli-view-name" so you need to use cisco-av-pair as cli-view-name=xxxx
AAA authentication associates only one view name to a particular user; that is, only one view name can be configured for a user in an authentication server.
In case you still have any issues, run debug parser view and share the output, I'll try to help.
~BR
Jatin Katyal
**Do rate helpful posts**
07-08-2013 09:25 AM
Sorry, by mistake I click on "Correct Answer"
The problem is I can switch to view context
DC1841Ro1(config)#parser view MYVIEW
No view Active! Switch to View Context
When I try to switch
DC1841Ro1#enable view
Password:
% Authentication failed
None password allows me to enter. Remeber I'm using AAA + NPS + ADirectory
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide