10-31-2002 09:13 PM - edited 02-21-2020 10:04 AM
Greetings,
I have a 3640 with an ATM card for our DSL customers. I have installed a HSSI interface to connect to a DS3.
The HSSI interface is not connecting. I get "hssi2/0 is up, line protocol is down". I set up a "debug cond hssi2/0" and a "debug ppp nego" and I got the following error:
Hs2/0 AAA/AUTHOR/LCP: Denied
I do have the router set up to authenticate my DSL customers through a radius server. Other debugs shows me that the router is communicating with the radius to "authenticate" the Hssi2/0 line.
Here is the "AAA" portion of my configuration:
aaa new-model
aaa authentication login default local
aaa authentication login console local
aaa authentication ppp default if-needed group radius local
aaa authorization network default group radius
aaa accounting update newinfo
aaa accounting exec default start-stop group radius
aaa accounting network default start-stop group radius
What do I need to do get the hssi interface to connect WITHOUT trying to authenticate through the radius server and still allow my DSL customers to authenticate?
bob bloise
system administrator
trellis technologies, Inc.
(704) 849-7789
10-31-2002 09:53 PM
You can try to configure a method list for the ppp authentication and network authorization and only apply it to the lines that are needed.
Default method list is applied to all interfaces.
Hope this helps,
-Nairi
11-01-2002 05:32 AM
I have looked for some configuration examples and can't any. Can anyone point me to a page with some conf examples?
Thanks in advance.........
bob bloise
11-01-2002 05:37 AM
Turn off authorization on the HSSI interface:
aaa authorization network NO_AUTHOR none
int hs2/0
ppp authorization NO_AUTHOR
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide