10-27-2005 11:38 AM - edited 03-10-2019 02:21 PM
Hello Guyz,
i am having issues with my tacacs server. We implemented AAA using linux based tacacs on our 35 around routers and swicthes. On our few Cisco 3700 series routers AAA doesent seems to work. It asks for username/password and then fall back to local enable password.
On the same hand few 3700 Series routers with different IOS do it very good.
Is it a common problem with IOS ? if you can guide me ??
Shakeel
10-31-2005 03:01 PM
I would debug AAA and I would try to guess what is the problem and differences beetwen IOS versions.
At last, I would upgrade IOS from one AAA failure 3700 to same version Router 3790 is working fine. If this upgrade is working fine .... is up to you.
Best Regards
Roberto
10-31-2005 04:09 PM
Roberto,
i did the same, and it worked when IOS was upgraded, but not every IOS is good for your setup, we had some issues with new IOS, High CPU Utilizations etc.. these sort of issue.
regards,
Shakeel
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide