AAA server marked as dead

[lni1]

We have configured 2 AAA servers for Wireless authentication purposes.

Now everything falls to the backup because the primary is marked as dead :

What are the points to check what is wrong ? The primary server is up and running, perhaps a problem with Radius ?

Oct 16 11:15:49: %DOT11-6-ASSOC: Interface Dot11Radio0, Station PO040003875 000f

.2093.94a0 Associated KEY_MGMT[NONE]AAA/SG/SERVER_SELECT Server (10.2.17.201:164

5,1646) marked dead. Skipping.

[a.kiprawih]

The problem indicates the primary ACS Server failed to respond to authentication request (radius).

The server might be up & running, and you even ping it without any problem. This has something to do with the radius (or tacacs+) services. Check the radius status from the ACS "Reports & Activity - ACS Service Monitoring", or from the server's event viewer.

Under the ACS Service monitoring, check the latest 'CSMonLog.csv' (or older file) for any CSRadius failed services.

HTH

AK

[lni1]

I found it, It was the proxy distribution table that was configured faulty.

Thanks anyway for your assistance

Lieven