06-29-2005 05:02 AM - edited 03-10-2019 02:12 PM
Hi,
I have 2600 router which i am using for my internet router. configured 1 serial and 1 ethernet . ethernet is coming in my intra net. ethernet has got valid ip. and it is connected to my core. and this router is behind pix.
configured tacacs on this router. i can ping this router from my acs server. configured aaa but i am not able to authenticate on this router.
pls give me solution
Thanks & Regards,
ciscobuddy
06-29-2005 02:00 PM
Did you check the failed attempts log in ACS?
Try the following debugs on the router:
debug tacacs
debug aaa authen
debug aaa author
This should give you some indication of what's happening.
07-05-2005 04:35 AM
Check and make sure that the ports are open in the firewall
1645 for authentication
1646 for accounting.
What do your tacacs+ debugs from the router say?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide