06-01-2012 03:09 PM - edited 03-10-2019 07:09 PM
We want to use ACS as a raduis server and use it for VPN user authentication
Remote Access VPN User---> ASA5510---->ACS v4.1---->LDAP
ASA is already configured for VPN, I am a newbie with ACS.Can someone explains me how to configure ACS as a radius server and integrate it with LDAP.
So when a user enters his username and password, ASA should send that to ACS and the ACS should compare it against LDAP.
Thanks
Solved! Go to Solution.
06-03-2012 05:45 AM
How to Configure ASA for Radius configuration and VPN authentication
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00808c18ff.shtml#cli
How to Configure ASA on ACS as a radius client:
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00808c18ff.shtml#acs
Verify Test authentication between ASA and ACS
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00808c18ff.shtml#veri
ACS and LDAP database Integration
After that define the hostname ( as LDAP server IP), Port as 389 and Admin username and password.
Regards,
Jatin
Do rate helpful posts-
06-03-2012 05:45 AM
How to Configure ASA for Radius configuration and VPN authentication
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00808c18ff.shtml#cli
How to Configure ASA on ACS as a radius client:
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00808c18ff.shtml#acs
Verify Test authentication between ASA and ACS
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00808c18ff.shtml#veri
ACS and LDAP database Integration
After that define the hostname ( as LDAP server IP), Port as 389 and Admin username and password.
Regards,
Jatin
Do rate helpful posts-
06-04-2012 02:07 PM
Thanks for the help.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide