Wondering why my ACS 5.1.0.44.3 is showing init for NTP instead of associated.
acs/admin# show run
clock timezone US/Eastern
!
ntp server 130.126.244.44
acs/admin# show ntp
Primary NTP : 130.126.244.44
synchronised to local net at stratum 11
time correct to within 12 ms
polling server every 1024 s
remote refid st t when poll reach delay offset jitter
==============================================================================
*127.127.1.0 LOCAL(0) 10 l 14 64 377 0.000 0.000 0.002
130.126.244.44 .INIT. 16 u - 1024 0 0.000 0.000 4000.00
Warning: Output results may conflict during periods of changing synchronization.
acs/admin#