ACS 5.1 NTP synchronized to Local

[altorres75]

Hello, I'm trying to synch time in an ACS 5.1 but after configuring with the ntp server command the show ntp command displays that time is synchronised to local net at stratum 11.

The ntp source is a Windows 2003 server and the show ntp command shows that it has an external refid with at stratum 2, but still the ACS won't synchronize with this source, only local.

Have any of you seen this issue?

Thanks,

Alex

[Jagdeep Gambhir]

Hi ,

Please check the timezone on the acs server and make sure it is same as AD server. Use command "show timezones" to get the list of timezones.

Regards,

~JG

Do rate helpful posts

[altorres75]

Thanks for the response Jagdeep,

I had already changed the TZ, for some reason I don't know after I stopped ACS service and added the ntp server command again the clock synchronized OK.  I say I have no idea how it worked as I did this a couple of times the previous day.  I'm guessing there was an issue with the NTP server (it's a windows 2003 server).

Regards,

Alex