cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

1849
Views
0
Helpful
1
Replies
rob.schieron
Beginner

ACS 5.2 802.1x EAP-FAST w/MSCHAPv2, Cisco WiSM WLC, AD 2008

Hi All,

I'm currently trying to replace an old ACS v3.3 with v5.2.0.26.2.

Looking to authenticate wireless clients with EAP-FAST, MSCHAPv2 inner method against AD.

Coming up against a lot of issues to do with the authentication - no problems on the AD side, but getting the EAP-FAST config right on the ACS is proving difficult.

I found this guide for PEAP-FAST(MSCHAPv2), does anyone know of anything similar for EAP-FAST(MSCHAPv2)?

http://www.cisco.com/image/gif/paws/112175/acs51-peap-deployment-00.pdf

Any guides for ACS 5.x with EAP-FAST would be very helpful, especially to do with certificates, pac provisioning, etc.

Thanks,

Rob

1 REPLY 1
dlignier
Beginner

Hello,

Did you find a guide for EAP-FAST with AD ?

I'm facing the same problem, I can't make EAP-FAST working with AD Account,

Thanks to you

Regards,

Gérald

Content for Community-Ad