12-05-2011 02:37 AM - edited 03-10-2019 06:36 PM
Hi, how can I configure ACS 5.2 to send syslog messages to CS-MARS ?
thank you in advance
greating
rs
12-05-2011 05:21 AM
1) Add a new Remote Log Target
System Administration > Configuration > Log Configuration > Remote Log Targets
Press "Add" and enter the details of the remote server
2) Select the categories of messages you want to be sent to this server
System Administration > Configuration > Log Configuration > Logging Categories > Global
Can select a category and then go to the Remote Syslog targets tab and select the new server you defined above if you want it to receive messages of this type
The confguration is hierarchical so if you define a target for "AAA Audit" it will apply to both "Failed Attempts" and "Passed Authentications"
Note these configruations are global (apply equally to all servers in the deployment) or can be done per instance and can have different settings on a per server basis
12-13-2011 05:57 AM
Hi, it seems no packet has been received by the CS-MARS.
Are you sure CS-MARS is compatible with ACS 5.2 ?
thank you in avdance
greatings
rs
12-14-2011 02:41 AM
I do not have any specific experience with CS-MARS. I was providing information as to how to define that the syslog messages themselves will be sent to a specific IP address
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide