cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

1333
Views
0
Helpful
1
Replies
RICHARD MASSELLE
Beginner

acs 5.2 and Infoblox netmri

I am trying to configure acs5.2 and tacacs+ to authenticate via active directory to infoblox netmri, has anyone done this? I am looking for basic setup, shell commands etc.. I test from netmri using tacacs+ servers and I pass test, but when trying to login to netmri appliance uitlizing acs Tacacs+ I fail. If I look into acs logs tacacs+ passes, but if I look at log on netmri the same username/pass fails? I amthink ing that I need to setup something in shell on acs Tacacs config in terms of profile i.e. sysadmin etc..

1 REPLY 1
RICHARD MASSELLE
Beginner

I have solved this issue. It took a couple of things..

1-     I had to go to the NetMRI side and under the "User Admin" tab "Users" add domain user name… the password will be greyed out as it will now try to auth you via Tacacs+ on the back end….

2-     I had to use FQDN domain name i.e.  AD-domain name@domain.subdomain.edu - I found this out by looking at logs on both ACS and Netmri, also Wireshark helped a bit..

Create
Recognize Your Peers
Content for Community-Ad

ISE Webinars


Miss a previous ISE webinar?
Never miss one again!

CiscoISE on YouTube