Network Access Control

Hello all,            I have a customer running two ACS 5.2 appliances in Primary-Secondary setup. The current log collector is the Primary ACS and I have a few questions regarding this set up.1) Can we make both the primary and secondary to collect ...

I have two ACS 4.2 configured as expected for replication but Primary ACS does not show any synchronization partner either on the left or right. The Secondary ACS does have synchronization partner listed. What could be the reason for this?

Good Morning,Im trying at the moment to adapt what we already have setup for authenticating IPSEC vpns.Currently below is how this is setup.We would like add ACLs based on which 3rd party company is dialing in. I understand how to do this with local ...

Hi there,We are currently running NAC 4.8 in layer 3 real IP gateway mode with Active Directory single sign on. I recently renewed our CAS server certificate with Verisign and have since had some PC's which appear to remain in the NAC authentication ...

Hi all,I have a problem regarding a ACS Patch upgrade from ACS 4.1.1.23 default to ACS 4.1.1.23.5.I need to enable the TACACS+ Administration Reports and therefor I need this update.Can anybody help me solving this issue?1. I have downloaded the .zip...

I can get it to authenticate.  But I've read some posts on ACS 4.2 and authorization, but I don't find anything similar.I want to control down to what commands the authenticated user can run.  I want the defintion to come fromthe ACS server, or at le...

Hi!We have a setup with an ASA terminating SSL VPN users authentication with smart-cards. The authentication is done between the client and the ASA via its certificate and crl check. This works fine.But, we would like to make sure that the user that ...

Hello folks,Years ago I installed some patches on my ACS  4.1.x.x and recently I upgraded the system to 4.2.Now on the upgrade status page the old patches are still there, are they still used by the device? What is expected to happen if I remove them...

Hi.  Does ACS v4.2 support the addition of the Nexus switches?  We have a few new Nexus devices that have been added to ACS, but cannot be accessed successfully.  A msg re: role based authentication is received.  Do I have to do something special in ...

I have ACS 5.3. I am testing EAP-TLS Machine Authentication using Active Directory as an external Identity Store. II was testing and everything was going fine until I did some failure testing.My problem: I deleted my computer account out of Active Di...

Hello,We've an issue with authorization on NCS system. NCS successfully integrated witch ACS, but there is a problem with one user. All users have equivalent rights under root. There is shell profile with all possible tasks (exported from NCS server)...

                   I intend to create ACS local account from file. What is maximum of accounts can be in ACS 4.2?